Views: 0 Author: Site Editor Publish Time: 2026-08-07 Origin: Site
TL;DR:
The NISSAN Engine Mount models 11220-ED000 and 11360-ED000 are rubber-and-iron engine mounts designed for the MR20DE engine in Bluebird and Sylphy sedans. They reduce vibration, protect drivetrain components, and are available for wholesale from ZHIJIE AUTOPARTS (ZJR Auto)—a China-based manufacturer with over 30 years of experience supplying Japanese vehicle parts globally.
An engine mount is one of those parts that rarely gets attention—until it fails. When the rubber degrades or the metal bracket cracks, you feel it immediately: vibration through the cabin, clunking on acceleration, and a sense that something is off. For Nissan Bluebird and Sylphy owners, the 11220-ED000 and 11360-ED000 are the OEM-reference mounts most technicians reach for first.
Choosing the right replacement matters more than most drivers realize. The wrong fit places stress on adjacent components, accelerates wear on the transmission mount, and can lead to expensive cascading repairs. That's why sourcing from a supplier that specializes in Japanese vehicle parts makes a real, measurable difference.
At ZHIJIE AUTOPARTS Co., Ltd. (ZJR Auto), founded in 1993, the focus has always been precision-fit rubber automotive components. With more than 2,000 product lines covering Toyota, Honda, Nissan, Mazda, and other Japanese brands, ZJR Auto has supplied auto parts manufacturers and repair shops worldwide for over three decades.
The engine mount connects the engine to the vehicle's chassis. Its job is twofold: secure the engine in place and absorb vibration so it doesn't transfer into the cabin. For front-wheel-drive sedans like the Nissan Bluebird and Sylphy—both known for their smooth highway ride—mount quality directly affects NVH (noise, vibration, and harshness) levels.
The 11220-ED000 is a front engine mount used on the MR20DE engine found in several Bluebird Sylphy variants produced from the early 2000s onward. The 11360-ED000 serves as a rear torque rod mount, working alongside the front mount to keep the engine stable under load. Both use vulcanized rubber-and-iron construction, which balances rigidity with vibration damping.
If you're sourcing a NISSAN Engine Mount for either of these positions, always confirm the OEM part number against your VIN before ordering—it's the fastest way to avoid fitment errors.
Worn engine mounts present recognizable symptoms. Catching them early prevents secondary damage to exhaust components, CV axles, and intake manifold connections.
Excessive vibration at idle — The engine rocks more than usual when stationary. This is often the first symptom owners notice.
Clunking during acceleration or gear changes — A loose or broken mount allows the engine to shift under torque, producing an audible knock.
Visible cracking or separation — During inspection, cracked rubber or a gap between the rubber and metal bracket indicates structural failure.
Engine misalignment — In severe cases, the engine sits visibly lower or at an angle, affecting belt alignment and coolant hose routing.
For Bluebird and Sylphy owners with high-mileage vehicles—particularly those over 100,000 km—a routine inspection of both the 11220-ED000 and 11360-ED000 positions is sound preventive practice.
The table below provides a quick reference for common engine mount part numbers across the three most popular Japanese brands. All models listed are available through ZJR Auto's wholesale catalog.
Brand | Part Number | Compatible Model | Engine Code | Mount Position | Material |
|---|---|---|---|---|---|
Nissan | 11220-ED000 | Bluebird Sylphy | MR20DE | Front | Iron & Rubber |
Nissan | 11360-ED000 | Bluebird Sylphy | MR20DE | Rear / Torque Rod | Iron & Rubber |
Honda | 50820-SVA-A05 | Civic 2005–2012 | R18A | Front Lower | Iron & Rubber |
Honda | 50820-TA0-A01 | Accord | K24Z | Rear | Iron & Rubber |
Toyota | 12305-22360 | Corolla / Auris / Rumion | 1ZR-FE | Front Left | Iron & Rubber |
Toyota | 12361-54143 | Hiace | 5L / 2L | Rear | Iron & Rubber |
These parts share the same core construction—vulcanized rubber bonded to a steel or iron bracket—but fitment is strictly model-specific. Do not substitute across models, even when physical dimensions appear similar.
For workshops and distributors sourcing a Honda Engine Mount alongside Nissan units, ZJR Auto's catalog supports mixed-brand orders with a standard minimum order quantity (MOQ) of 50 pieces per part number, with payment accepted via T/T or L/C.
ZJR Auto (ZHIJIE AUTOPARTS Co., Ltd.) has operated since 1993. The company's product range spans engine mounts, strut mounts, suspension bushings, and stabilizer bushings—over 2,000 SKUs in total. The core focus on Japanese-market vehicles means engineering tolerances are validated against OEM specifications from Toyota, Nissan, Honda, Mazda, and other brands.
Several factors keep wholesalers and distributors coming back:
OEM-referenced part numbers — Every product is cataloged by the original manufacturer's part number, eliminating ordering guesswork.
Rubber compound quality — ZJR Auto's vulcanized rubber is formulated for heat resistance, which matters in engine bay conditions that routinely exceed 100°C.
Wholesale-friendly MOQ — At 50 pieces per SKU, smaller distributors can maintain adequate stock without overcommitting capital.
Global reach — ZJR Auto has exhibited at international trade shows including AAPEX Las Vegas and Automechanika Shanghai, with customers across Southeast Asia, the Middle East, and beyond.
For distributors expanding their catalog with a Toyota Engine Mount range alongside Nissan and Honda lines, ZJR Auto's breadth of coverage means fewer suppliers to manage and more consistent quality across every brand.
What is the difference between part numbers 11220-ED000 and 11360-ED000 for the Nissan Bluebird Sylphy?
The 11220-ED000 is the front engine mount, which primarily supports the engine's weight. The 11360-ED000 is a rear torque rod mount that controls engine rotation under acceleration. Both are required for correct drivetrain alignment on the MR20DE engine. Replacing only one while the other has worn will not fully resolve vibration or clunking.
Are ZJR Auto engine mounts direct OEM replacements?
Yes. ZJR Auto products are manufactured to match OEM dimensions and rubber hardness specifications. They install at the original mounting points without modification, making them direct drop-in replacements for the listed applications.
What is the minimum order quantity for wholesale purchases from ZJR Auto?
The standard MOQ is 50 pieces per part number for most engine mounts. For specific models or mixed-brand orders, contact ZJR Auto directly at info@zjrauto.com.
How long do rubber engine mounts typically last?
Under normal driving conditions, rubber engine mounts typically last between 60,000 and 100,000 km. Vehicles used in high-load conditions—frequent towing, heavy urban stop-and-go traffic, or extreme temperature environments—may see faster degradation.
Does ZJR Auto supply mounts for light commercial vehicles as well as passenger cars?
Yes. The catalog includes mounts for passenger sedans such as the Corolla, Civic, and Bluebird Sylphy, as well as light commercial vehicles like the Toyota Hiace.
A failed engine mount is a straightforward fix—but only when you have the right part. Fitment accuracy, rubber compound quality, and supplier reliability are the variables that separate a clean repair from a repeat job.
ZHIJIE AUTOPARTS (ZJR Auto) has supplied precision-fit rubber automotive components to workshops and distributors worldwide since 1993. With OEM-referenced part numbers, wholesale-friendly MOQs, and coverage across all major Japanese brands, ZJR Auto is a practical sourcing partner for businesses that cannot afford fitment errors or supply gaps.
Browse the full engine mount catalog at zjrauto.com, or contact the team directly to request a quote for your specific part numbers.
